RepairLogic
ADAS Calibration Planning
Take the Guesswork Out of ADAS Calibrations
Modern vehicles are built with dozens of sensors, cameras, and driver assistance systems that all require precise calibration after a collision repair. RepairLogic automatically identifies all required calibrations so nothing gets missed and every repair meets OEM requirements.
Take a Test Drive
Get More Information
ADAS calibrations are the most commonly missed operation in collision repair.
A fender bender that replaces a single sensor can trigger requirements for module reprogramming, system initialization, and multiple calibration procedures. For example, a windshield replacement may require a forward-facing camera recalibration. The reality is that these types of operations are now standard on modern vehicles.
The problem is that calibration requirements vary by vehicle, repair, and even trim level, and they're not always obvious. Without the right tools, calibrations get missed. Not through carelessness, but because modern ADAS systems are complex enough that manual identification is an unreliable way to catch everything. Missed calibrations mean missed revenue, potential liability, and vehicles leaving the shop that aren't fully safe.
ARTICLE
The Growing Challenge of ADAS Calibrations
Want to go deeper? Hear directly from calibration experts on why required calibrations get missed — and how leading shops are reducing risk.
Read Now
Every Required Calibration, Found and Organized Automatically
RepairLogic automatically identifies required ADAS calibrations based on the specific vehicle and repair being performed, then organizes them in a single view through the Calibration Guide. As procedures are added to the plan, calibration requirements surface in real time with no manual cross-referencing, hunting across multiple sources, or relying on technician memory to catch what applies.
- Automatically identifies required calibrations based on vehicle and damage profile
- Calibration Guide consolidates all requirements for the repair in a single, organized view
- 95% of RepairLogic repair plans include at least one calibration procedure
- Saves an average of 17 minutes per plan and increases captured calibrations by 53%
- Makes it easy to review, document, and share calibration requirements with insurers
The data backs it up: 95% of RepairLogic repair plans include one or more calibration procedures, and over half of those were added automatically by the platform. Since its launch, more than 700 shops have used the Calibration Guide, saving an average of 17 minutes per plan and increasing captured calibration procedures by 53%.
Documentation That Supports Insurer Approval
Calibrations are one of the most frequently disputed line items in insurer conversations. When a shop can point to the OEM procedure that required a calibration — up-to-date and sourced directly from the manufacturer — disputes become less likely and easier to resolve.
RepairLogic repair plans include the OEM basis for every calibration identified, giving estimators a clear, defensible record to share with adjusters. The result is fewer back-and-forth conversations and faster approvals on these required operations.
- Every calibration is tied to its OEM source procedure
- Shareable repair plans give adjusters direct visibility into calibration requirements
- Reduces disputes by grounding every line item in manufacturer documentation
- Supports faster insurer approvals on calibration-related operations
The data behind the Calibration Guide.
Results from more than 700 shops using RepairLogic's Calibration Guide.
of RepairLogic repair plans include one or more ADAS calibration procedures
increase in captured calibration procedures after adopting the Calibration Guide
average time saved per plan using the Calibration Guide
shops using the Calibration Guide since launch
The calibrations were always required. Now they're always captured.
ADAS calibration requirements have been a part of OEM repair procedures for many years. What's changed is the volume and complexity of systems that need to be accounted for on every repair. RepairLogic gives shops the tools to keep up, automatically surfacing what's required so estimators can focus on the repair rather than the research.
Make sure every calibration is accurate and accounted for
See how RepairLogic automatically identifies every required ADAS calibration and gives you the documentation to back it up.
Take a Test Drive
Get More Information